terça-feira, 2 de abril de 2013

Tutorial fix internet connection lost in multiplayer games (in isp´s with pppoe)



This tutorial was created due to the fact that I was having (as almost everyone else) some stability problems with my MEO's router. I couldn't play almost any of my games because the router constantly lost its connection.

After hours and hours of trying to solve the problem through MEO's technical support (which didn't happened...) I ended up buying a new router (WITH a wan port) to handle the Internet connection. MEO's router would, then, only serve to manage the set-top boxes and telephones, which ended up solving my issues.

(This configuration is easy enough to follow and should work with the majority of the routers. However take into consideration that the following instructions and images are mainly targeted at MEO, Sapo Fiber and Sapo Adsl services.)

Example - Asus RT-N16

1 - First we need to change the default IP address of the new router from 192.168.1.1 to 192.168.2.1. (Failing to do this will cause in incompatibilities between the two routers). 

To do that connect the router directly to the computer (using ports 1,2,3 or 4 and NEVER the WAN port). Then, enter the router's configuration page using its default address, which, in this case, is 192.168.1.1 (if this address doesn't work for you please refer to the router's quick start guide. After that click in "LAN" and change the IP address from 192.168.1.1 to 192.168.2.1.

It should look something like this:


 

Resuming: 

  • Connect the router directly to the computer using one of the 4 LAN ports (and not the WAN).
  • You shouldn't try to connect both routers between themselves before changing the IP address of one of them, as an address conflict will happen between them.
  • After changing the IP address (and saving such change) it's recommended to unplug and plug the cable back in order to allow the computer's network card to adopt the new IP address.


The IP address of the new router is now 192.168.1.2 (which will also be the new address to its configuration page).


2 - Configuring MEO's (the one provided by the ISP) router:


Connect to MEO's router configuration page using its IP address (in our case 192.168.1.254). Enter as administrator using the following credentials:

    Username: 'Administrator'    Password: '3!play'

     In the homescreen click in "Disconnect" in order to disable the broadband connection, which should result in the following screen:





3 - Connect all the devices as illustrated by the following figure:








4 - In this step we shall configure the new router so that it can be able to connect to the internet. The following steps are specific to the Asus RT-N16 but they should be similar to anyother router that has a WAN port). 

  • Enter the router configuration page through its IP address (which was changed in the 1st step and is now 192.168.1.2).
  • Click in 'WAN' and in 'Wan Connection Type' select PPPOE mode.
  • In account setting introduce the login data that you use for your ISP connection.



 

      And that's it!


5 - (Optional: Tested only on the Asus RT-n16 carrying firmware 3.0.0.0.108).


 Connect MEO's set-top boxes to the Asus router. Up to two set-top boxes may be used without causing noticeable losses in the internet service performance.

    - Go to the LAN/IPTV, enable everything and then click 'Apply';
     
   



Go to the WAN menu and, at the bottom of the page, configure the "Special Requirement from ISP" as follows:
  • ISP Profile: 'none'
  • IPTV STB Port: select the port number in which the set-top box is connected
  • Host Name: empty
  • MAC Address: empty;
  • Apply (and make sure that the set-top box is connected to the selected port.

 
 
 
    And that's it!



Important notes:


- If your Internet package has an 100+Mbps connection make sure that the router you want to buy has gigabit ports (10/100/1000).
- Asus RT-N15, RT-N16 e RT-N66u support such speeds (Asus RT-N56U is also capable but requires a modified firmware - http://code.google.com/p/rt-n56u/"]RT-N56U_1.1.1.8e-b4)


DD-WRT Firmware:


Some of the routers being sold currently seem to be highly unstable when leading with high speeds and throughputs of data (which is most noticeable when playing videogames, where latency has to be quite small). Fortunaly there are some custom firmwares available (such as DD-WRT or Tomato) that seem to solve the problem. This Asus RT-N16 presented some of these stability problems which were ccompletly solved thorugh the installation of DD-WRT.

Keep in mind, however, that the process of installing these custom firmwares is not an easy task and may require some prior knowledge on the theme.
Please consult this link in order to verify if your router supports DD-WRT (which should run on over 80% of the available routers). You can also check this one for a more in-depth analysis.

segunda-feira, 1 de abril de 2013

Tutorial como atualizar o firmware do router asus de forma segura

Este tutorial foi criado como complemento para o  tutorial-usar-outro-router-gerir-internet, para ajudar a fazer a atualizaçãode firmware da maneira correta .

O firmware 3.x.x.x também chamado de asuswrt , é um firmware mais estável e ainda mais fácil de configurar , não é possível instala-lo em todos os modelos , mas o tutorial serve para atualizar qualquer modelo .

O RT-N10U, RT-N10U B RT-N16 , RT-N56, RT-N66 , suportam o novo firmware 3.x.x.x


Podem ver o interface do firmware aqui
Asuswrt3.x.x.xDemo DEMO asuswrt
  


o firmware dos routers da asus pode ser encontrado aqui asus routers

   Clicar no modelo do router que adquirirão
   No lado direito clicar em support
   Clicar em download
   Clicar em firmware e fazer download do mais recente e extrair com o Winrar

  







Apos termos o novo firmware extraído e pronto a instalar temos por precaução de fazer um reset de fabrica a router da asus .

   1º entrar na pagina do router , 192.168.2.1

   clicar em (administatrion) (Restore/Save/Upload Setting) e em Factory default clicar em restore.



   Isto deve demorar cerca de 2 minutos


desligar todos os cabos de rede e usb do router , e voltar a ligar apenas o cabo de rede que   esta ligado ao vosso PC , para o ip ser alterado , pois após o reset passa a ser o 192.168.1.1 com USER:admin PASS:admin

voltar a entrar na pagina do router 192.168.1.1, clicar em( Administration) depois (Firmware  Upgrade) depois onde diz (new firmware file) clicar em (Browse…) e escolher o a pasta para onde extraímos o firmware no inicio e depois clicar upload.


    I
sto deve demorar cerca de 3 minutos

 A Asus recomenda que pressionem o Butão de reset que se encontra na parte de trás do router apos a atualização do firmware .
Ou então repetir o passo 2  



E esta feito , agora e só voltar a configurar tudo como no tutorial



 

terça-feira, 26 de março de 2013

Como efetuar uma ligação pppoe através do Windows


Como efetuar uma ligação pppoe através do Windows


Quem esta com problemas com routers tg784 ou tg799 pode usar esta configuração para os resolver sem ter de comprar outro router , mas apenas o computador com a ligação pppoe efetuada vai ter aceso a internet .

Muito importante. Com esta configuração a Nat e a firewall do thomson não vão ter efeito na ligação pppoe efetuada pelo Windows por isso vão ter de ter um antivírus potente e com firewall caso contrario o vosso computador vai estar exposto a todo o tipo de ataques sem qualquer tipo de proteção .

Recomendo o kaspersky internet security 2012 , podem encontrar a versão de teste que inclui 30 dias aqui
Kis 2012



Como configurar
1º Entrar na pagina do router da meo via 192.168.1.254 com o user : Administrator e a password: 3!play , e na pagina inicial clicar em desligar a ligação de banda larga,

        




2º No Windows vão a network and sharing center e fazem a configuração como nas imagem em baixo





                   

 
                                                       
   

 
                                                  
   

 
                                                       
   

 

                                                            


 

 O username é asxxxxxxxxx@3p.sapo.pt e a password por defeito é 102030 , mas poderá ter sido alterada , se não souberem qual é liguem para o apoia a cliente

E esta feito

Volto a lembrar que têm de ter um antivírus e uma firewall


domingo, 24 de março de 2013

Meo tg784 , tg799 + outro router por ligação pppoe



Este tutorial foi criado Porque como quase todos tive problemas com o router da meo, Não conseguia jogar a maior parte dos meus jogos sem o router estar sempre a perder a ligação.



Após passar horas a ligar para o apoio técnico e o problema sem ser resolvido optei por comprar um router com porta wan e usa-lo para gerir a internet e o router da meo fica apenas a gerir a box e o telefone , o que resolveu todos os problemas de uma vez só .





A configuração é simples com a maior parte dos routers.

Funciona com o serviço meo e sapo fibra e adsl



Exemplo com Asus RT-N16

- ligar o router novo diretamente ao pc para mudar o ip original para 192.168.2.1,



  • Entrar no endereço que vem no manual do vosso router , no caso da Asus e 192.168.1.1,
  • Clicar em lan e alterar o ip 192.168.1.1 para 192.168.2.1, e depois apply.


Deve ficar assim
  




Importante !!!

  • O Asus deve ser ligado a primeira vez para alterar o IP diretamente ao pc através da porta 1,2,3 ou 4 e nunca a porta wan.
  • O Asus não deve ser nunca ligado ao thomson antes de ser alterado o IP para 192.168.2.1. não ter isto em conta pode resultar em incompatibilidades e a ligação vai cair provavelmente.
  • A seguir a alterar o IP do ASUS têm de desligar e ligar o cabo de rede de novo para a placa de rede mudar também o ip .
  • O IP para configuração do Asus agora passa a ser o 192.168.2.1


- Entrar na pagina do router da meo via 192.168.1.254 com o user : Administrator e a password: 3!play ,

  • Na pagina inicial clicar em desligar a ligação de banda larga,

     
Deve ficar como na foto abaixo
 





- ligar tudo como na foto abaixo



 
    



- vamos configurar o novo router para fazer a ligação a internet , este exemplo é do Asus mas podem usar qualquer router com porta wan



  • Entrar na pagina do router que foi alterada no primeiro passo , 192.168.2.1
  • Clicar em wan e em wan connection type escolher o modo PPPOE ,
  • Em baixo em account setting introduzir o username e a password da meo e clicar apply.

     
 


O username é asxxxxxxxxx@3p.sapo.pt a password por defeito é 102030 .

Em caso de duvida solicitem o username e a password através da linha de apoia ao cliente da meo



E deve estar feito





ligar a meo box ao asus " opcional só testado no Asus rt-n16 firmware 3.0.0.0.108 "

Podem ser ligadas ate duas meo box sem interferirem no desempenho do serviço de internet



  • Ir a Lan /IPTV e colocar tudo enable e fazer apply
     
 

 Depois ir a wan e no fundo da pagina vão ver "Special Requirement from ISP" e vão configurar da seguinte forma

  • Select ISP Profile "none"
  • Choose IPTV STB Port "escolhem a porta ou portas onde vão ligar a box " eu uso a 4
  • Host Name "fica vazio"
  • MAC Address: "fica vazio "
  • Fazer apply e ligar a box na porta que escolherão
      
 

E deve estar tudo


Importante!! net 100Mbps

No caso que terem net de 100Mbps tem de ser um router com portas 10/100/1000

Os seguintes modelos suportam essa velocidade 
Asus RT-N15 ,RT-N16 e RT-N66u

Asus RT-N56U "Para funcionar corretamente tem de ser instalado o firmware modificado http://code.google.com/p/rt-n56u/"]RT-N56U_1.1.1.8e-b4

Tp-Link - WR1043N(D)


Importante!! Firmware alternativo
Há alguns routers que não parecem ser muito estáveis com o firmware original , por isso aconselho pesquisar no Google se o router que pretendem comprar suporta outro tipo de firmware como por exemplo DD-WRT , tomato ou outros , o meu Asus rt-n16 tem esse problema mas quando lhe instalei o firmware DD-WRT ficou tudo a 100% e nunca mais tive problemas .

podem usar este site para ver se o router que pretendem comprar suporta DD-wrt o que e o caso e cerca de 80% dos router no mercado , basta introduzir o modelo do router 
http://www.dd-wrt.com/site/support/router-database
ou também a lista detalhada com características 
http://www.dd-wrt.com/wiki/index.php/Supported_Devices